| 电缆盖板模具在生产过程中应注意防止塑料软化, |
| 添加时间：2022/4/12 16:16:12 浏览次数： |
| 电缆盖板模具在生产过程中应注意防止塑料软化,为了防止模具变形通过外界力量进行改正,将放有水泥的模具互相挤在一起防止变形,小型电扭王块模具 高铁遮板模具 保定室内设计培训 保定平面设计培训缆盖板模具出现问题的时候少,而大型的就必须增加模具壁厚,夏季温度高虽然能增加脱模的次数,但是也禁止在暴晒,防止因暴晒影响模具的规格。 Attention should be paid to the prevention of plastic softening during the production process of cable cover plate mold. In order to prevent the mold deformation, the molds with cement are squeezed together to prevent deformation. Small cable cover mold has few problems, while large cable cover mold must increase the mold wall thickness. Although high temperature in summer can increase the frequency of demoulding, it is also prohibited to expose to the sun, Prevent the mold specification from being affected by exposure to the sun |
| 上一页 水沟电缆槽移动模具包括行走系统及定位系统 |
| 下一页 生产过程中应注意防止塑料软化 |
Copyright © 技术支持：遨游网络