联系我们

名称:保定市电缆槽模具厂

电话:xxx

手机:13313028229

邮箱:xxx

地址:xxx

新闻动态
水沟电缆槽移动模具包括行走系统及定位系统
水沟电缆槽移动模具包括行走系统及定位系统。在行走钢轨上安装好水沟电缆槽台车的各个部件,调试好后可以快速施工水沟电缆槽。 该水沟电缆槽移动模具长12m,与衬砌台车长度一致,确保每环水沟电缆槽施工缝能与衬砌施工缝一致,能确保仰拱沉降变形后不会拉裂水沟电缆槽。 该模具可循环使用,简单环保,4人操作,月进度平均360m,最高月进度可达500m。 二、适用范围 适用于隧道水沟电缆槽施工。 三、应用情况 该水沟电缆槽移动模具使用后能确保每环水沟电缆槽施工缝能与衬砌施工缝一致,能确保仰拱沉降变形后不会拉裂水沟电缆槽。 该模具可循环使用,简单环保,操作人员少,施工速度快,成型水沟电缆槽美观,各项标准满足验收要求,极具推广价值。 局限与建议:该模板长度固定,每循环搭接长度不能过长,否则会损坏上一环成型水沟电缆槽,短衬砌和洞室处无法用该模具,可使用特制木模和钢模进行补缺。 The moving die of the trench cable groove includes the walking system and the positioning system. All parts of the trench of the trench are installed on the walking rail, and the trench cable groove can be constructed quickly after the debugging is good. the movable groove of the trench cable slot is 12m long, which is consistent with the length of the lining trolley. It is ensured that the construction joint of each ring groove can be consistent with the lining construction joint, which ensures that the inverted channel can not split the ditch after the settlement deformation. the mold can be recycled, simple and environmentally friendly, 4 people operation, the average monthly progress of 360m, the maximum monthly progress up to 500m. two and scope of application are suitable for the construction of tunnel water trench cable groove. three, application situation the water trench cable slot mobile mold can ensure that every ring groove construction slot is consistent with the lining construction joint, which ensures that the inverted arch will not split the ditch after settlement and deformation. the mold is recyclable, simple and environment-friendly, few operators, fast speed of construction, beautiful shape of the groove, and all standards meet the acceptance requirements, which is of great popularization value. limitation and suggestion: This template fixed length per cycle, lap length should not be too long, otherwise it will damage a ring forming ditch cable trough, short tunnels lining and cannot use the mold, can be filled with special wood and steel mould.

联系方式

  1. 名称:保定市电缆槽模具厂
  2. 电话:xxx
  3. 手机:13313028229
  4. 邮箱:xxx
  5. 地址:xxx

版权 © 保定市电缆槽模具厂 网址:dianlancao.75ix.cn  推荐:电缆槽模具,高铁电缆槽模具,混凝土电缆槽模具

网站建设及优化保定遨游网络公司