13313028229联系我们
名称：保定市电缆槽模具厂
电话：xxx
手机：13313028229
邮箱：xxx
地址：xxx
新闻动态
模压成型工艺
模压成型工艺
compression molding
这是一种综合性能较为理想的电缆支架成型工艺。它是把玻璃纤维、树脂以及各种添加剂的混合物放入模具中，加热加压即成型所需形状支架制品。这种加工方法产品质量稳定，根据不同使用要求、把模具设计成不同形状，就可以得到质量重现性很好的异型支架制品。生产效率比较高，价格也比较低廉。
This is a kind of cable support molding process with ideal comprehensive performance. It is to put the mixture of glass fiber, resin and various additives into the mold, heat and pressure to form the required shape support products. The product quality is stable by this processing method. According to different use requirements, the special-shaped bracket products with good quality reproducibility can be obtained by designing the mold into different shapes. The production efficiency is relatively high, and the price is relatively low.
1、电缆沟，电缆渠道的净宽及电缆型号大小选择支架规格。重型支架运用的电缆外径不大于110毫米，轻型支架适用的电缆外径不大于80毫米。2.环境适宜温度范围：-20°-+70°（过冷易脆，过热易软）。
1. The clear width of cable trench and cable channel and the size of cable type shall be selected according to bracket specification. The outer diameter of cable for heavy support is not more than 110mm, and that of light support is not more than 80mm. 2. Suitable temperature range: - 20 ° - + 70 ° (supercooling is easy to be brittle, overheated is easy to be soft).
2、安装宜水平走向，如倾斜则需采用其他措施固定电缆。
2. Installation should be horizontal, if inclined, other measures should be taken to fix the cable.
3、要求平衡、竖直，同侧支架水平间距80厘米，双侧支架错开安装，保证支架均衡承载。
3. It is required to be balanced and vertical. The horizontal spacing of supports on the same side is 80cm. The supports on both sides are staggered to ensure the balanced bearing of the supports.
4、固定墙面须平整，保证底座受力面积，避免扭曲。铺设电缆时，宜采用自上而下铺设，拖动电缆时宜水平拖动
4. The fixed wall must be flat to ensure the stressed area of the base and avoid distortion. When laying cables, they should be laid from top to bottom and horizontally when dragging cables
compression molding
这是一种综合性能较为理想的电缆支架成型工艺。它是把玻璃纤维、树脂以及各种添加剂的混合物放入模具中，加热加压即成型所需形状支架制品。这种加工方法产品质量稳定，根据不同使用要求、把模具设计成不同形状，就可以得到质量重现性很好的异型支架制品。生产效率比较高，价格也比较低廉。
This is a kind of cable support molding process with ideal comprehensive performance. It is to put the mixture of glass fiber, resin and various additives into the mold, heat and pressure to form the required shape support products. The product quality is stable by this processing method. According to different use requirements, the special-shaped bracket products with good quality reproducibility can be obtained by designing the mold into different shapes. The production efficiency is relatively high, and the price is relatively low.
1、电缆沟，电缆渠道的净宽及电缆型号大小选择支架规格。重型支架运用的电缆外径不大于110毫米，轻型支架适用的电缆外径不大于80毫米。2.环境适宜温度范围：-20°-+70°（过冷易脆，过热易软）。
1. The clear width of cable trench and cable channel and the size of cable type shall be selected according to bracket specification. The outer diameter of cable for heavy support is not more than 110mm, and that of light support is not more than 80mm. 2. Suitable temperature range: - 20 ° - + 70 ° (supercooling is easy to be brittle, overheated is easy to be soft).
2、安装宜水平走向，如倾斜则需采用其他措施固定电缆。
2. Installation should be horizontal, if inclined, other measures should be taken to fix the cable.
3、要求平衡、竖直，同侧支架水平间距80厘米，双侧支架错开安装，保证支架均衡承载。
3. It is required to be balanced and vertical. The horizontal spacing of supports on the same side is 80cm. The supports on both sides are staggered to ensure the balanced bearing of the supports.
4、固定墙面须平整，保证底座受力面积，避免扭曲。铺设电缆时，宜采用自上而下铺设，拖动电缆时宜水平拖动
4. The fixed wall must be flat to ensure the stressed area of the base and avoid distortion. When laying cables, they should be laid from top to bottom and horizontally when dragging cables
